Elesma Gigalink -GLT43303

$66.00 inc. GST

SKU: GLT43303 Category:

Description

  • 433mhz
  • 3 button transmitter with membrane and Elsema label

Brochure

Coding the hand transmitters

  • Connect power to the gigalink ,make sure all switches on the mode dip switches are off.
  • Place a jumper across acros the cc pins of the receiver.
  • Connect the transmitter and receiver using the coding cable.
  • Press any two channels simultaneously for 2 seconds.
  • Led should blink twice to cinfirm code programming and then switch off.
  • Remove the coding cable.
  • Remove the jumper from the cc pin.
  • The receiver is now programmed with the transmitters code.